Hide Transcript
Transcript is auto-generated.
what we find is people try to be
creative they try to find corners to cut
short cuts how do I make this
installation shorter right and you see
in the manual and the manuals never
really tell you why you need to do
something they just tell you what you
need to do and so unfortunately people
assume that because the whys not told
they're going to get creative and so a
lot of people will put a battery monitor
and they'll take the voltage right at
the panel thinking oh well there's
voltage there why was what I go all the
way to the battery but then what happens
is if you ever lose the switch gets
turned off not the battery monitor comes
off it's not powered anymore because the
source of power is probably coming from
the panel too so now all your settings
are long or what happens if the fuse
feeding the panel actually blows now you
go to the battery model it's time to
diagnostic you're going to go my
batteries are dead some of the batteries
are dead it's that the voltage sent at
the panel is dead so if you actually
sense voltage at the battery you know
what's happening at the battery what
happens downstream of the battery is
separate and it allows for better
troubleshooting so what I always tell
people anybody is going to tackle a
battery monitor or anything else is
follow the instructions to the letter
never think you're smarter than the
desgtiners who told you what to do unless
you're an absolute expert and you
understand all the implications of your
decision so voltage sends and power
should be add the battery fuse but
directly at the battery
[Music]
you
English (auto-generated)