Raymarine Evolution EV-200 Power Autopilot Pack Includes:
EV-1 Sensor Core (E70096)
p70Rs Control Head (E70329)
ACU-200 Actuator Control Unit (E70099)
Evolution Cable Kit (R70160)
Rotary Rudder Reference Transducer (M81105)
Features:
General FeaturesEvolution autopilots eliminate the need for complicated set up and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot
Thanks to the intelligent EV sensor core, autopilot automatically evolves and

show more

Raymarine Evolution EV-200 Power Autopilot Pack Includes:
EV-1 Sensor Core (E70096)
p70Rs Control Head (E70329)
ACU-200 Actuator Control Unit (E70099)
Evolution Cable Kit (R70160)
Rotary Rudder Reference Transducer (M81105)
Features:
General FeaturesEvolution autopilots eliminate the need for complicated set up and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot
Thanks to the intelligent EV sensor core, autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
Suitable for mid-size powerboats with hydraulic steering ram capacity 4.9 in 3 - 14 in 3
Requires Type 1 Hydraulic Drive Unit (not included) Consult the Requirements Tab for a Ram Size Chart of popular manufactures cylinder sizes.

EV-1 Sensor CoreDesigned for Evolution mechanical and hydraulic autopilot systems
SeaTalk ng networking enables a single cable connection for power and data to the Evolution ACU-200 and extended SeaTalk ng and NMEA 2000 networks
Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
9-Axis sensor monitors vessel motion in (3) dimensions
Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
Simple SeaTalk ng connectivity to control head and ACU
Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays

p70Rs Control HeadCombination of rotary dial and push-button controls designed for powerboats
New LightHouse™ user interface is easy to learn and use
Start-up wizard helps you configure the pilot quickly and easily
Wide 160° horizontal and vertical viewing angles
Advanced LED backlighting offers low power consumption, and delivers vibrant color and contrast
Anti-reflective coating for improved visibility in bright sunlight
Simple system and group dimming / illumination
Supported autopilot modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer
Support for multiple data sources
SeaTalk ng / NMEA 2000 and SeaTalk 1 connectivity (no bridging required)

ACU-200 Actuator Control UnitDelivers reliable autopilot drive power and provides power to the SeaTalk ng bus
Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor

Evolution SeaTalk ng Cable Kit includes:(1) SeaTalk ng power cable (0.4m)
(1) SeaTalk ng backbone cable (5m)
(1) SeaTalk ng spur cable (0.4m)
(1) SeaTalk ng 5-way connector block
(2) SeaTalk ng T-piece connector
(2) SeaTalk ng terminator

Specifications:

Raymarine Part No. T70156
EV-1 Sensor Core (E70096)Nominal Supply Voltage: 12 Volt DC
Operating Voltage Range: 10.8 - 15.6 Volt DC
Power Consumption: 30 mA
Sensors:3-Axis digital accelerometer
3-Axis digital compass
3-Axis gyro digital angular rate sensor

Data Connections: SeaTalk ng
Waterproof Rating: IPX6
Dimensions: 5.5" W x 5" H x 5" D

p70Rs Control Head (E70329)Nominal Supply Voltage: 12 Volt DC
Operating Voltage Range: 9 - 16 Volt DC
Screen size 3.5"
Display Sunlight readable optically bonded LCD
Resolution 320 x 240 QVGA
Colours 16 bit colour (64K colours)
Colour Palettes Four colour pallettes - two day, inverse and red / black
LCD Brightness 1200 nit
Power consumption 1.6 Watts
Connections SeaTalk & SeaTalkng compliant with NMEA2000 marine networks
Operating temperature -025ºC to 55ºC (-13ºF to 131ºF)
Storage temperature -030ºC to 70ºC (-22ºF to 158ºF)
Relative humidity 93% max
Waterproofing IPX6
Conformance Europe 2004/108/EC | Australia and New Zealand C-Tick compliance level 2

ACU-200 Actuator Control Unit (E70099)Drive Current Output: Max. continuous 15 Amp
Drive Clutch Output: Up to 2.0 Amp continuous, selectable between 12 / 24 Volt DC
Nominal Supply Voltage: 12 or 24 Volt DC
Operating Voltage Range: 10.8 - 31.2 Volt DC
Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24 Volt DC
Power Consumption (standby) - SeaTalk ng : 20 mA @ 12 Volt DC
Data Connections: SeaTalk ng
Connections: Rudder reference sensor (Included), sleep switch, power, drive motor, drive clutch, ground
Waterproof Rating(s): Drip resistant
 

show less