Raymarine EV-200 Pilot w/ p70s - no drive

Part #: T70155

Raymarine T70155 EV-200 Sail Pilot Kit (Requires Rotary or Linear Drive)
Raymarine Evolution EV-200 Sail Autopilot Pack includes:

EV-1 Sensor Core (E70096)
p70s Control Head (E70328)
ACU-200 Actuator Control Unit (E70099)
Evolution Cable Kit (R70160)
Rotary Rudder Reference Transducer (M81105)
Designed to be paired with a Type 1 Mechanical Linear Drive, or Type 1 Mechanical Rotary Drive unit

Features:
General Features
Evolution autopilots eliminate the need for complicated setup and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot
Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
Suitable for mechanically steered mid-size sailboats with max. displacement of 24,000 lbs
Requires Type 1 Mechanical Linear Drive (not included)*
EV-1 Sensor Core
Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
Mounted above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing/submersion standards
9-Axis sensor monitors vessel motion in (3) dimensions
Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
Simple SeaTalk ng connectivity to control head and ACU
Solid-state sensor technology delivers dynamic accuracy to within 2° in all conditions
Auto-compensation for on board magnetic fields and reliable heading accuracy in northern and southern extremes
Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
p70s Control Head
3.5” super bright oversized LCD for maximum visibility
All-weather, low power, optically bonded display technology delivers brighter colours, sharper contrast, and a wide viewing angle
Button or rotary control options for sail and power applications
Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Display the pilot information in different formats with an automatic 3-step setup for leisure, cruising and performance
Simple system and group dimming/illumination
Easy to use Lighthouse user interface with sculpted rubber keypad for precise operation in all conditions
SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks
New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays
Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective sun cover
ACU-200 Actuator Control Unit
Delivers reliable autopilot drive power and provides power to the SeaTalk ng bus
Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
Includes Rudder Reference Indicator M81105
Provides a powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor
Evolution Cable Kit includes:
(1) SeaTalk ng power cable (0.4m)
(1) SeaTalk ng backbone cable (5m)
(1) SeaTalk ng spur cable (0.4m)
(1) SeaTalk ng 5-way connector block
(2) SeaTalk ng T-piece connector
(2) SeaTalk ng terminator
Specifications:
Raymarine Part No. T70155
EV-1 Sensor Core (E70096)
Nominal Supply Voltage: 12 Volt DC
Operating Voltage Range: 10.8 - 15.6 Volt DC
Power Consumption: 30 mA
Sensors:
3-Axis digital accelerometer
3-Axis digital compass
3-Axis gyro digital angular rate sensor
Data Connections: SeaTalk ng
Waterproof Rating: IPX6
Dimensions: 5.5" W x 5" H x 5" D
p70s Control Head (E70328)
Nominal Supply Voltage: 12 Volt DC
Operating Voltage Range: 9 - 16 Volt DC
Power Consumption: 69 mA (no lighting) / 134 mA (100% illumination)
Data Connections: SeaTalk ng (2) and SeaTalk 1 Compatible
Display Size: 3.5" TFT LCD / 320 x 240 pixels
Waterproof Rating: IPX6
Dimensions: 4.33" W x 4.52" H
Flush Mount Cutout: 3.54" dia.
ACU-200 Actuator Control Unit (E70099)
Drive Current Output: Max. continuous 15 Amp
Drive Clutch Output: Up to 2.0 Amp continuous, selectable between 12 / 24 Volt DC
Nominal Supply Voltage: 12 or 24 Volt DC
Operating Voltage Range: 10.8 - 31.2 Volt DC
Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24 Volt DC
Power Consumption (standby) - SeaTalk ng : 20 mA @ 12 Volt DC
Data Connections: SeaTalk ng
Connections: Rudder reference sensor, sleep switch, power, drive motor, drive clutch, ground
Waterproof Rating(s): Drip resistant